Summary of fabrication technologies for bio-inspired structurally colored fibers.
Understanding of upscaling nano/micro photonic structure into macro 1D configuration.
Key challenges and future development prospects of structurally colored fibers.
| [1] | Kirya P., Mestre-Farrera A., Yang J., et al. (2025). Leveraging optical anisotropy of the Morpho butterfly wing for quantitative, stain-free, and contact-free assessment of biological tissue microstructures. Adv. Mater. 37:2407728. DOI:10.1002/adma.202407728 |
| [2] | Niu S., Li B., Ye J., et al. (2016). Angle-dependent discoloration structures in wing scales of Morpho menelaus butterfly. Sci. China Tech. Sci. 59:749−755. DOI:10.1007/s11431-016-6007-4 |
| [3] | Zi J., Yu X., Li Y., et al. (2003). Coloration strategies in peacock feathers. Proc. Natl. Acad. Sci. USA 100:12576−12578. DOI:10.1073/pnas.2133313100 |
| [4] | D’Alba L., Meadows M., Maia R., et al. (2021). Morphogenesis of iridescent feathers in Anna’s hummingbird Calypte anna. Integr. Comp. Biol. 61:1502−1510. DOI:10.1093/icb/icab123 |
| [5] | Liu F., Dong B. Q., Liu X. H., et al. (2009). Structural color change in longhorn beetles Tmesisternus isabellae. Opt. Express 17:16183−16191. DOI:10.1364/OE.17.016183 |
| [6] | Vignolini S., Rudall P. J., Rowland A. V., et al. (2012). Pointillist structural color in Pollia fruit. Proc. Natl. Acad. Sci. USA 109:15712−15715. DOI:10.1073/pnas.1210105109 |
| [7] | Sun J., Bhushan B. and Tong J. (2013). Structural coloration in nature. RSC Adv. 3:14862. DOI:10.1039/c3ra41096j |
| [8] | Vukusic P. and Sambles J. R. (2003). Photonic structures in biology. Nature 424:852−855. DOI:10.1038/nature01941 |
| [9] | Middleton R. and Sinnott-Armstrong M. (2024). Structural color in fruits: Biomaterials to inspire physical optics. APL Photon. 9:081102. DOI:10.1063/5.0208528 |
| [10] | Yu K., Fan T., Lou S., et al. (2013). Biomimetic optical materials: Integration of nature’s design for manipulation of light. Prog. Mater. Sci. 58:825−873. DOI:10.1016/j.pmatsci.2013.03.003 |
| [11] | Choi S. H., Kim D., Lee Y., et al. (2025). Bioinspired dynamic colour change. Nat. Rev. Bioeng. 3:579−595. DOI:10.1038/s44222-025-00298-2 |
| [12] | Tang Y., Wu B., Li J., et al. (2024). Biomimetic structural hydrogels reinforced by gradient twisted plywood architectures. Adv. Mater. 37:2411372. DOI:10.1002/adma.202411372 |
| [13] | Chen K., Huang J., Ding L., et al. (2025). Preparation, microstructure, and mechanical properties of enamel-like nanocomposites for dental repair application. Innov. Mater. 3:100111. DOI:10.59717/j.xinn-mater.2024.100111 |
| [14] | Pei G., Wang J. and Jiang L. (2021). Research progress of bioinspired photonic crystal fibers. Acta Chimica Sinica 79:414. DOI:10.6023/a20120556 |
| [15] | Li H., Sun X. and Peng H. (2015). Mechanochromic fibers with structural color. ChemPhysChem 16:3761−3768. DOI:10.1002/cphc.201500736 |
| [16] | Ma J. and Yang Z. (2025). Smart liquid crystal elastomer fibers. Matter 8:101950. DOI:10.1016/j.matt.2024.101950 |
| [17] | Zhang K.-Q. (2010). Structural colored fibers based on the photonic crystal structures by colloidal assembly. J. Fiber Bioeng. Inform. 2:214−218. DOI:10.3993/jfbi03201002 |
| [18] | Liu Z., Zhang Q., Wang H., et al. (2011). Structural colored fiber fabricated by a facile colloid self-assembly method in micro-space. Chem. Commun. 47:12801. DOI:10.1039/c1cc15588a |
| [19] | Haibin N., Ming W. and Wei C. (2011). Sol-gel co-assembly of hollow cylindrical inverse opals and inverse opal columns. Opt. Express 19:25900. DOI:10.1364/OE.19.025900 |
| [20] | Kolle M., Zheng B., Gibbons N., et al. (2010). Stretch-tuneable dielectric mirrors and optical microcavities. Opt. Express 18:4356−4364. DOI:10.1364/OE.18.004356 |
| [21] | Yuan W., Zhou N., Shi L., et al. (2015). Structural coloration of colloidal fiber by photonic band gap and resonant Mie scattering. ACS Appl. Mater. Interfaces 7:14064−14071. DOI:10.1021/acsami.5b03289 |
| [22] | Chen F., Yang H., Li K., et al. (2017). Facile and effective coloration of dye-inert carbon fiber fabrics with tunable colors and excellent laundering durability. ACS Nano 11:10330−10336. DOI:10.1021/acsnano.7b05139 |
| [23] | Khudiyev T., Hou C., Stolyarov A. M., et al. (2017). Sub-micrometer surface-patterned ribbon fibers and textiles. Adv. Mater. 29:1605868. DOI:10.1002/adma.201605868 |
| [24] | Li G.-X., Shen H.-X., Li Q., et al. (2019). Fabrication of colorful colloidal photonic crystal fibers via a microfluidic spinning technique. Mater. Lett. 242:179−182. DOI:10.1016/j.matlet.2019.01.093 |
| [25] | Liu Y. and Wu P. (2020). Bioinspired hierarchical liquid-metacrystal fibers for chiral optics and advanced textiles. Adv. Funct. Mater. 30:2002193. DOI:10.1002/adfm.202002193 |
| [26] | Geng Y., Kizhakidathazhath R. and Lagerwall J. P. F. (2022). Robust cholesteric liquid crystal elastomer fibres for mechanochromic textiles. Nat. Mater. 21:1441−1447. DOI:10.1038/s41563-022-01355-6 |
| [27] | Geng Y. and Lagerwall J. P. F. (2023). Multiresponsive cylindrically symmetric cholesteric liquid crystal elastomer Fibers templated by tubular confinement. Adv. Sci. 10:2301414. DOI:10.1002/advs.202301414 |
| [28] | Martinez A. P., Ng A., Nah S. H., et al. (2024). Active-textile yarns and embroidery enabled by wet-spun liquid crystalline elastomer filaments. Adv. Funct. Mater. 34:2400742. DOI:10.1002/adfm.202400742 |
| [29] | Martinez A. P., Decker L. K., Wang K., et al. (2024). High-speed and scalable wet spinning of graphene/liquid crystalline elastomer composite filaments. Adv. Funct. Mater. 35:2422176. DOI:10.1002/adfm.202422176 |
| [30] | Li S., Yu K.-H., Garcia I., et al. (2024). Direct ink writing of cephalopod skin-like core-shell fibers from cholesteric liquid crystal elastomers and dyed solutions. Adv. Funct. Mater. 35:2413965. DOI:10.1002/adfm.202413965 |
| [31] | Chen Y., Liu Y., Valenzuela C., et al. (2025). Universal water transfer printing enables scalable structural coloration of responsive textile fibers for wearable electronics. Adv. Mater. 38:e16769. DOI:10.1002/adma.202516769 |
| [32] | Tian Y., Ding R., Zhang S. S. Y. S., et al. (2025). Recent advances in next-generation textiles. Adv. Mater. 37:2417022. DOI:10.1002/adma.202417022 |
| [33] | Biranje S. S., Kaushik S., Marewad D., et al. (2024). Applications of nanocellulose and its derivatives in developing sustainable textiles. Cellulose 31:5343−5379. DOI:10.1007/s10570-024-05935-4 |
| [34] | Zheng Y., Lin G., Zhou W., et al. (2024). Bioinspired polydopamine modification for interface compatibility of PDMS-based responsive structurally colored textiles. ACS Appl. Mater. Interfaces 16:51748−51756. DOI:10.1021/acsami.4c11967 |
| [35] | Fu J., Liu T., Yan T., et al. (2024). Transparent core-sheath composite fibers as flexible temperature sensor based on liquid crystal color change for smart sportswear. J. Mol. Liq. 393:123574. DOI:10.1016/j.molliq.2023.123574 |
| [36] | Wang Y., Niu W., Lo C.-Y., et al. (2020). Interactively full-color changeable electronic fiber sensor with high stretchability and rapid response. Adv. Funct. Mater. 30:2000356. DOI:10.1002/adfm.202000356 |
| [37] | Hooke R. (1665). Micrographia: Or some physiological descriptions of minute bodies made by magnifying glasses with observations and inquiries thereupon. Royal Society. London. |
| [38] | Anderson T. F. and Richards Jr. A. G. (1942). An electron microscope study of some structural colors of insects. J. Appl. Phys. 13:748−758. DOI:10.1063/1.1714827 |
| [39] | Xiong R., Luan J., Kang S., et al. (2020). Biopolymeric photonic structures: Design, fabrication, and emerging applications. Chem. Soc. Rev. 49:983−1031. DOI:10.1039/c8cs01007b |
| [40] | Kolle M., Salgard-Cunha P. M., Scherer M. R. J., et al. (2010). Mimicking the colourful wing scale structure of the Papilio blumei butterfly. Nat. Nanotechnol. 5:511−515. DOI:10.1038/nnano.2010.101 |
| [41] | Benson O. (2011). Assembly of hybrid photonic architectures from nanophotonic constituents. Nature 480:193−199. DOI:10.1038/nature10610 |
| [42] | Shevtsova E., Hansson C., Janzen D. H., et al. (2011). Stable structural color patterns displayed on transparent insect wings. Proc. Natl. Acad. Sci. USA. 108:668−673. DOI:10.1073/pnas.1017393108 |
| [43] | Lalli N. S. and Giusti A. (2023). Coherence effects on the interference colors of soap films. J. Appl. Phys. 134:093103. DOI:10.1063/5.0158178 |
| [44] | Lenau T. and Barfoed M. (2008). Colours and metallic sheen in beetle shells — A biomimetic search for material structuring principles causing light interference. Adv. Eng. Mater. 10:299−314. DOI:10.1002/adem.200700346 |
| [45] | Sharma V., Crne M., Park J. O., et al. (2014). Bouligand structures underlie circularly polarized iridescence of scarab beetles: A closer view. Mater. Today Proc. 1:161−171. DOI:10.1016/j.matpr.2014.09.019 |
| [46] | Smith G. S. (2009). Structural color of Morpho butterflies. Am. J. Phys. 77:1010−1019. DOI:10.1119/1.3192768 |
| [47] | Yoshioka S. and Kinoshita S. (2007). Polarization-sensitive color mixing in the wing of the Madagascan sunset moth. Opt. Express 15:2691−2701. DOI:10.1364/oe.15.002691 |
| [48] | Vukusic P., Sambles J. R., Lawrence C. R., et al. (1999). Quantified interference and diffraction in single Morpho butterfly scales. Proc. Biol. Sci. 266:1403−1411. DOI:10.1098/rspb.1999.0794 |
| [49] | Whitney H. M., Kolle M., Andrew P., et al. (2009). Floral iridescence, produced by diffractive optics, acts as a cue for animal pollinators. Science 323:130−133. DOI:10.1126/science.1166256 |
| [50] | Middleton R., Tunstad S. A., Knapp A., et al. (2024). Self-assembled, disordered structural color from fruit wax bloom. Sci. Adv. 10:eadk4219. DOI:10.1126/sciadv.adk4219 |
| [51] | Zhao Y., Xie Z., Gu H., et al. (2012). Bio-inspired variable structural color materials. Chem. Soc. Rev. 41:3297. DOI:10.1039/c2cs15267c |
| [52] | Li M., Song Y., Liu C., et al. (2023). Self-assembly fabrication and applications of photonic crystal structure color materials. Acta Chimica Sinica 81:809. DOI:10.6023/a23030080 |
| [53] | Liu C., Hou X., Zhu Z., et al. (2025). Bioinspired micro-nano photonic materials. Chem. Soc. Rev. 54:8434−8468. DOI:10.1039/d5cs00606f |
| [54] | Johnson R. W., Hultqvist A. and Bent S. F. (2014). A brief review of atomic layer deposition: From fundamentals to applications. Mater. Today 17:236−246. DOI:10.1016/j.mattod.2014.04.026 |
| [55] | Li R., Zhang S., Chen H., et al. (2023). Multicolored structural coloration of carbon nanotube fibers. SusMat 3:102−110. DOI:10.1002/sus2.111 |
| [56] | Chen F., Huang Y., Li R., et al. (2022). Superdurable and fire-retardant structural coloration of carbon nanotubes. Sci. Adv. 8:eabn5882. DOI:10.1126/sciadv.abn5882 |
| [57] | Eyckens D. J., Arnold C. L., Randall J. D., et al. (2019). Fiber with butterfly wings: Creating colored carbon fibers with increased strength, adhesion, and reversible malleability. ACS Appl. Mater. Interfaces 11:41617−41625. DOI:10.1021/acsami.9b11826 |
| [58] | Xu H., Zhu Y., Guo Y., et al. (2024). Bio-inspired structural coloration of carbon fiber based on thin film interference: synergistically enhancing thermal durability, tensile strength and interface properties of colored fiber. React. Funct. Polym. 194:105789. DOI:10.1016/j.reactfunctpolym.2023.105789 |
| [59] | Sakoda K. (2005). Optical properties of photonic crystals (Springer Berlin Heidelberg). |
| [60] | Tan T. L., Wong D. and Lee P. (2004). Iridescence of a shell of mollusk Haliotis Glabra. Opt. Express 12:4847−4854. DOI:10.1364/OPEX.12.004847 |
| [61] | Zada I., Zhang W., Li Y., et al. (2016). Angle dependent antireflection property of TiO2 inspired by cicada wings. Appl. Phys. Lett. 109. DOI:10.1063/1.4962903. |
| [62] | Stavenga D. G., Foletti S., Palasantzas G., et al. (2005). Light on the moth-eye corneal nipple array of butterflies. Proc. Biol. Sci. 273:661−667. DOI:10.1098/rspb.2005.3369 |
| [63] | Pan X., Zhang Z. and Su M. (2024). Colloidal self-assembly in biosensing strategies for biomarkers diagnosis. Innov. Mater. 2:100076. DOI:10.59717/j.xinn-mater.2024.100076 |
| [64] | Yuan W., Li Q., Zhou N., et al. (2019). Structural color fibers directly drawn from colloidal suspensions with controllable optical properties. ACS Appl. Mater. Interfaces 11:19388−19396. DOI:10.1021/acsami.8b21070 |
| [65] | Li M., Tan H., Jia L., et al. (2020). Supramolecular photonic elastomers with brilliant structural colors and broad-spectrum responsiveness. Adv. Funct. Mater. 30:2000008. DOI:10.1002/adfm.202000008 |
| [66] | Zhao Y., Li R., Wang B., et al. (2023). Scalable structural coloration of carbon nanotube fibers via a facile silica photonic crystal self-assembly strategy. ACS Nano 17:2893−2900. DOI:10.1021/acsnano.2c11296 |
| [67] | Zhu L., Meng Y., Zhou J., et al. (2024). Thermoresponsive structural coloration of hydrogel fibers. ACS Appl. Polym. Mater. 6:1720−1729. DOI:10.1021/acsapm.3c02579 |
| [68] | Zhang L., Li M. and Tang J. (2026). Non-equilibrium colloidal materials. Innov. Mater. 4:100156. DOI:10.59717/j.xinn-mater.2025.100156 |
| [69] | Xu P., Hou J., Cheng J., et al. (2022). Color carbon fiber and its discoloration response. Carbon 199:42−50. DOI:10.1016/j.carbon.2022.07.039 |
| [70] | Yuan X., Liu Z., Shang S., et al. (2016). Visibly vapor-responsive structurally colored carbon fibers prepared by an electrophoretic deposition method. RSC Adv. 6:16319−16322. DOI:10.1039/c5ra09917j |
| [71] | Zhou N., Zhang A., Shi L., et al. (2013). Fabrication of structurally-colored fibers with axial core–shell structure via electrophoretic deposition and their optical properties. ACS Macro Lett. 2:116−120. DOI:10.1021/mz300517n |
| [72] | Liu Z., Zhang Q., Wang H., et al. (2013). Structurally colored carbon fibers with controlled optical properties prepared by a fast and continuous electrophoretic deposition method. Nanoscale 5:6917. DOI:10.1039/c3nr01766d |
| [73] | Liu Z., Zhang Q., Wang H., et al. (2013). Magnetic field induced formation of visually structural colored fiber in micro-space. J. Colloid Interface Sci. 406:18−23. DOI:10.1016/j.jcis.2013.05.057 |
| [74] | Mitov M. and Dessaud N. (2006). Going beyond the reflectance limit of cholesteric liquid crystals. Nat. Mater. 5:361−364. DOI:10.1038/nmat1619 |
| [75] | Guan Y., Agra-Kooijman D. M., Fu S., et al. (2019). Responsive liquid-crystal-clad fibers for advanced textiles and wearable sensors. Adv. Mater. 31:1902168. DOI:10.1002/adma.201902168 |
| [76] | Zheng J., Liu X., Yuan C., et al. (2024). Dual-stimuli responsive chromatic cholesteric fibres with programmable structural-colour. J. Mater. Chem. C 12:10985−10991. DOI:10.1039/d4tc01004c |
| [77] | Kolle M., Lethbridge A., Baumberg M. K. J. J., et al. (2013). Bio-inspired band-gap tunable elastic optical multilayer fibers. Adv. Mater. 25:2239−2245. DOI:10.1002/adma.201203529 |
| [78] | Zhou S., Zhang C., Fu Z., et al. (2024). Color construction of multi-colored carbon fibers using glucose. Nat. Commun. 15:1979. DOI:10.1038/s41467-024-46395-5 |
| [79] | Shang S., Liu Z., Zhang Q., et al. (2015). Facile fabrication of a magnetically induced structurally colored fiber and its strain-responsive properties. J. Mater. Chem. A 3:11093−11097. DOI:10.1039/c5ta00775e |
| [80] | Shang S., Zhang Q., Wang H., et al. (2016). Facile fabrication of magnetically responsive PDMS fiber for camouflage. J. Colloid Interface Sci. 483:11−16. DOI:10.1016/j.jcis.2016.08.005 |
| [81] | Shang S., Zhu P., Wang H., et al. (2020). Thermally responsive photonic fibers consisting of chained nanoparticles. ACS Appl. Mater. Interfaces 12:50844−50851. DOI:10.1021/acsami.0c14749 |
| [82] | Chen Z., Yu Y., Guo J., et al. (2021). Heterogeneous structural color microfibers for cardiomyocytes tug-of-war. Adv. Funct. Mater. 31:2007527. DOI:10.1002/adfm.202007527 |
| [83] | Liu L., Xu W., Ding Y., et al. (2020). A review of smart electrospun fibers toward textiles. Compos. Commun. 22:100506. DOI:10.1016/j.coco.2020.100506 |
| [84] | Yu J. and Kan C.-W. (2018). Review on fabrication of structurally colored fibers by electrospinning. Fibers 6:70. DOI:10.3390/fib6040070 |
| [85] | Spahn P., Finlayson C. E., Etah W. M., et al. (2011). Modification of the refractive-index contrast in polymer opal films. J. Mater. Chem. 21:8893. DOI:10.1039/c1jm00063b |
| [86] | Yuan S.-J., Meng W.-H., Du A.-H., et al. (2019). Direct-writing structure color patterns on the electrospun colloidal fibers toward wearable materials. Chinese J. Polym. Sci. 37:729−736. DOI:10.1007/s10118-019-2286-0 |
| [87] | Kohri M., Yanagimoto K., Kawamura A., et al. (2018). Polydopamine-based 3D colloidal photonic materials: Structural color balls and fibers from melanin-like particles with polydopamine shell layers. ACS Appl. Mater. Interfaces 10:7640−7648. DOI:10.1021/acsami.7b03453 |
| [88] | Qin Q. and Xu Y. (2024). Hydroxypropyl cellulose-based meter-long structurally colored fibers for advanced fabrics. Adv. Sci. 11:2404761. DOI:10.1002/advs.202404761 |
| [89] | Tran A., Boott C. E. and MacLachlan M. J. (2020). Understanding the self-assembly of cellulose nanocrystals-toward chiral photonic materials. Adv. Mater. 32:1905876. DOI:10.1002/adma.201905876 |
| [90] | Chu G. (2024). Controlled self-assembly of cellulose nanocrystal as custom-tailored photonics and complex soft matter. Acc. Mater. Res. 5:1388−1400. DOI:10.1021/accountsmr.4c00216 |
| [91] | Wang Q., Niu W., Feng S., et al. (2023). Accelerating cellulose nanocrystal assembly into chiral nanostructures. ACS Nano 17:14283−14308. DOI:10.1021/acsnano.3c03797 |
| [92] | Droguet B. E., Liang H.-L., Frka-Petesic B., et al. (2022). Large-scale fabrication of structurally coloured cellulose nanocrystal films and effect pigments. Nat. Mater. 21:352−358. DOI:10.1038/s41563-021-01135-8 |
| [93] | Peng Y., Wei X., Liang Y., et al. (2024). Advances in structural color composite films based on cellulose nanocrystals. Ind. Crops Prod. 221:119294. DOI:10.1016/j.indcrop.2024.119294 |
| [94] | Li J., Lu C., Ye C., et al. (2024). Structural, optical, and mechanical insights into cellulose nanocrystal chiral nematic film engineering by two assembly techniques. Biomacromolecules 25:3507−3518. DOI:10.1021/acs.biomac.4c00169 |
| [95] | Zou X., Xue R., An Z., et al. (2023). Recent advances in flexible CNC-based chiral nematic film materials. Small 20:2303778. DOI:10.1002/smll.202303778 |
| [96] | Zhang F., Yu J., Zhong W., et al. (2025). Responsive photonic filaments from confined self-assembly of cellulose nanocrystals. ACS Nano 19:6299−6308. DOI:10.1021/acsnano.4c15863 |
| [97] | Abouraddy A. F., Bayindir M., Benoit G., et al. (2007). Towards multimaterial multifunctional fibres that see, hear, sense and communicate. Nat. Mater. 6:336−347. DOI:10.1038/nmat1889 |
| [98] | Nguyen-Dang T., de Luca A. C., Yan W., et al. (2017). Controlled sub-micrometer hierarchical textures engineered in polymeric fibers and microchannels via thermal drawing. Adv. Funct. Mater. 27:1605935. DOI:10.1002/adfm.201605935 |
| [99] | Qu Y., Nguyen-Dang T., Page A. G., et al. (2018). Superelastic multimaterial electronic and photonic fibers and devices via thermal drawing. Adv. Mater. 30:1707251. DOI:10.1002/adma.201707251 |
| [100] | Wang Z., Wu T., Wang Z., et al. (2020). Designer patterned functional fibers via direct imprinting in thermal drawing. Nat. Commun. 11:3842. DOI:10.1038/s41467-020-17674-8 |
| [101] | Kim S. H., Hwang H. and Yang S. M. (2012). Fabrication of robust optical fibers by controlling film drainage of colloids in capillaries. Angew. Chem. Int. Ed. 51:3601−3605. DOI:10.1002/anie.201108324 |
| [102] | Kim J. B., Li S., Wang K.-Y., et al. (2025). Multi-mode mechanochromic responses from cholesteric liquid crystal elastomer tubes of uniform sheath. Adv. Mater. 37:2504461. DOI:10.1002/adma.202504461 |
| Tang Y., Jiao H., Song B., et al. (2026). Architectural engineering of bio-inspired structural color fibers: From microscopic assembly to macroscopic fiber integration. The Innovation Materials 4:100242. https://doi.org/10.59717/j.xinn-mater.2026.100242 |
To request copyright permission to republish or share portions of our works, please visit Copyright Clearance Center's (CCC) Marketplace website at marketplace.copyright.com.
Timeline of the development of SCF fabrication techniques.
Structural color principles for the design of SCFs
Construction of thin-film interference layer on fiber surface
Construction of multilayer interference coating on fiber surface
External field-assisted photonic assembly on fiber surface
Cholesteric liquid crystal (CLC) coating on fiber surface
Photonic structure assembly within fiber
CLC organization within fiber
Chiral nematic organization within fiber
Construction of grating structure from fiber
Construction of hollow structural color fiber