Advanced Search
Article Contents
ABOUT THIS ARTICLE
The Innovation Materials > 2025 Vol. 3 > No. 3 > 100149
Next Article Previous Article
COMMENTARY   Open Access     Cite

Surface modification technologies for promoting the widespread use and recycling of carbon fibers in the construction industry

  • 1.

    Institute of Construction Materials, Technische Universität Dresden, 01062 Dresden, Germany

  • 2.

    Department of Civil and Environmental Engineering, University of California, Davis, CA 95616, USA

  • 3.

    Shanghai Key Laboratory for Digital Maintenance of Buildings and Infrastructure, School of Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

  • 4.

    School of Environmental Science and Engineering, Hubei Key Laboratory of Multi-media Pollution Cooperative Control in Yangtze Basin, Huazhong University of Science and Technology, Wuhan 430074, China

  • 5.

    State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou 310027, China

  • 6.

    These authors contributed equally

    • Show all affliationsShow less
More Information
The Innovation Materials  3(3),  https://doi.org/10.59717/j.xinn-mater.2025.100149  |  Cite this article
    • FullText(HTML)
  • 加载中
    • REFERENCES
  • [1] Li H., Liebscher M., Michel A., et al. (2021). Oxygen plasma modification of carbon fiber rovings for enhanced interaction toward mineral-based impregnation materials and concrete matrices. Constr. Build. Mater. 273:121950. DOI:10.1016/j.conbuildmat.2020.121950

    View in Article Google Scholar

    [2] Li H., Liebscher M., Zhao D., et al. (2023). A review of carbon fiber surface modification methods for tailor-made bond behavior with cementitious matrices. Prog.Mater. Sci. 132:101040. DOI:10.1016/j.pmatsci.2022.101040

    View in Article Google Scholar

    [3] Sato F. E. K. and Nakata T. (2021). Analysis of the impact of vehicle lightweighting on recycling benefits considering life cycle energy reductions. Resour. Conserv. Recy. 164:105118. DOI:10.1016/j.resconrec.2020.105118

    View in Article Google Scholar

    [4] Shimanoe H., Mashio T., Nakabayashi K., et al. (2020). Manufacturing spinnable mesophase pitch using direct coal extracted fraction and its derived mesophase pitch based carbon fiber. Carbon 158:922-929. DOI:10.1016/j.carbon.2019.11.082

    View in Article Google Scholar

    [5] Le N.-D., Varley R. J., Hummel M., et al. (2022). A review of future directions in the development of sustainable carbon fiber from bio-based precursors. Mater. Today Sustain. 20:100251. DOI:10.1016/j.mtsust.2022.100251

    View in Article Google Scholar

    • Cited by

  • Cite this article:

    Li H., Zhang N., Yang J., et al. (2025). Surface modification technologies for promoting the widespread use and recycling of carbon fibers in the construction industry. The Innovation Materials 3:100149. https://doi.org/10.59717/j.xinn-mater.2025.100149
    Li H., Zhang N., Yang J., et al. (2025). Surface modification technologies for promoting the widespread use and recycling of carbon fibers in the construction industry. The Innovation Materials 3:100149. https://doi.org/10.59717/j.xinn-mater.2025.100149

Welcome!

To request copyright permission to republish or share portions of our works, please visit Copyright Clearance Center's (CCC) Marketplace website at marketplace.copyright.com.

PDF
Figures(1)    

Share

  • Share the QR code with wechat scanning code to friends and circle of friends.

Article Metrics

Article views(3683) PDF downloads(2265)

Relative Articles

Cited by

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return

    {{newsColumn.name}}

    {{newsColumn.name}}

    Stay connected

    {{newsColumn.name}}

    Website copyright © Innovation Press. Published articles are licensed under CC BY with copyright retained by the authors.