Topological thermomagnetic generator with compact closed magnetic circuit suppresses stray fields and reaches 65.2% magnetic flux utilization.
Gd-based prototype cycles between 282–357 K, delivering ~0.16 V peak open-circuit voltage (0.051 V g-1).
Validated on Gd, Ho2Fe17/In, and La(Fe,Si)13Hᵧ/In at 290/330/335 K—material-adaptive across temperature windows.
Six-unit series array scales near-linearly to ~0.8 V, demonstrating modular, scalable TMG architecture.
| [1] | Schierning G. (2018). Bring on the heat. Nat. Energy 3:92−93. DOI:10.1038/s41560-018-0093-4 |
| [2] | Forman C., Muritala I.K., Pardemann R., et al. (2016). Estimating the global waste heat potential. Renewable Sustainable Energy Rev. 57:1568−1579. DOI:10.1016/j.rser.2015.12.192 |
| [3] | Straub A.P., Yip N.Y., Lin S., et al. (2016). Harvesting low-grade heat energy using thermo-osmotic vapour transport through nanoporous membranes. Nat. Energy 1:1−6. DOI:10.1038/nenergy.2016.90 |
| [4] | Firth A., Zhang B. and Yang, A. (2019). Quantification of global waste heat and its environmental effects. Appl. Energy 235:1314−1334. DOI:10.1016/j.apenergy.2018.10.102 |
| [5] | Hou, M. Chen H., Li S., et al. (2025). A tri-mode photothermal, phase-change, and radiative-cooling film for all-day thermoelectric generation. Adv. Mater. 37:2505601. DOI:10.1002/adma.202505601 |
| [6] | Wu G., Zhang Q., Tan X., et al. (2024). Bi2Te3-based thermoelectric modules for efficient and reliable low-grade heat recovery. Adv. Mater. 36:2400285. DOI:10.1002/adma.202400285 |
| [7] | Yan Q. and Kanatzidis M.G. (2021). High-performance thermoelectrics and challenges for practical devices. Nat. Mater. 21:503−513. DOI:10.1038/s41563-021-01109-w |
| [8] | Shi X. and Chen L. (2016). Thermoelectric materials step up. Nat. Mater. 15:691−692. |
| [9] | Bell L.E. (2008). Cooling, heating, generating power, and recovering waste heat with thermoelectric systems. Science 321:1457−1461. DOI:10.1126/science.1158899 |
| [10] | Shi X.-L., Zou J. and Chen Z.-G. (2020). Advanced thermoelectric design: From materials and structures to devices. Chem. Rev. 120:7399−7515. DOI:10.1021/acs.chemrev.0c00026 |
| [11] | Bu Z., Zhang X., Hu Y., et al. (2022). A record thermoelectric efficiency in tellurium-free modules for low-grade waste heat recovery. Nat. Commun. 13:237. DOI:10.1038/s41467-021-27916-y |
| [12] | Ang A.K.R., Yamazaki I., Hirata K., et al. (2023). Development of Cu2Se/Ag2(S,Se)-based monolithic thermoelectric generators for low-grade waste heat energy harvesting. ACS Appl. Mater. Interfaces 15:46962−46970. DOI:10.1021/acsami.3c09823 |
| [13] | Li W., Goyal G.K., Stokes D., et al. (2023). High-performance skutterudite/half-Heusler cascaded thermoelectric module using the transient liquid phase sintering joining technique. ACS Appl. Mater. Interfaces 15:2961−2970. DOI:10.1021/acsami.2c19137 |
| [14] | Zhang Y., Li Z., Singh S., et al. (2023). Defect‐engineering‐stabilized AgSbTe2 with high thermoelectric performance. Adv. Mater. 35:2208994. DOI:10.1002/adma.202208994 |
| [15] | Srivastava V., Song Y., Bhatti K., et al. (2011). The direct conversion of heat to electricity using multiferroic alloys. Adv. Energy Mater. 1:97–104. DOI:10.1002/aenm.201000048 |
| [16] | Chen H., Liu M., Yu Z., et al. (2025). Enhanced heat transfer for thermomagnetic generation in low-grade waste heat harvesting. Adv. Mater. 37:2500544. DOI:10.1002/adma.202500544 |
| [17] | Joseph J., Fontana E., Devillers T., et al. (2023). A Gd-film thermomagnetic generator in resonant self-actuation mode. Adv. Funct. Mater. 33:2301250. DOI:10.1002/adfm.202301250 |
| [18] | Gueltig M., Wendler F., Ossmer H., et al. (2017). High-performance thermomagnetic generators based on Heusler alloy films. Adv. Energy Mater. 7:1601879. DOI:10.1002/aenm.201601879 |
| [19] | Vuarnoz D., Kitanovski A., Gonin C., et al. (2012). Quantitative feasibility study of magnetocaloric energy conversion utilizing industrial waste heat. Appl. Energy 100:229−237. DOI:10.1016/j.apenergy.2012.04.051 |
| [20] | Deepak K., Varma V.B., Prasanna G., et al. (2019). Hybrid thermomagnetic oscillator for cooling and direct waste heat conversion to electricity. Appl. Energy 233-234:312–320. DOI:10.1016/j.apenergy.2018.10.057. |
| [21] | Kishore R.A., Davis B., Greathouse J., et al. (2019). Energy scavenging from ultra-low temperature gradients. Energy Environ. Sci. 12:1008−1018. DOI:10.1039/c8ee03084g |
| [22] | Kishore R.A. and Priya S. (2018). A review on design and performance of thermomagnetic devices. Renewable Sustainable Energy Rev. 81:33−44. DOI:10.1016/j.rser.2017.07.035 |
| [23] | Cugini F., Gallo L., Garulli G., et al. (2025). In-operando test of tunable Heusler alloys for thermomagnetic harvesting of low-grade waste heat. Acta Mater. 288:120847. DOI:10.1016/j.actamat.2025.120847 |
| [24] | Ahmed R., Kim Y., Mehmood M.U., et al. (2019). Power generation by a thermomagnetic engine by hybrid operation of an electromagnetic generator and a triboelectric nanogenerator. Int. J. Energy Res. 2:2−11. DOI:10.1002/er.4691 |
| [25] | Ujihara M., Carman G.P. and Lee D.G. (2007). Thermal energy harvesting device using ferromagnetic materials. Appl. Phys. Lett. 91:093508. DOI:10.1063/1.2775096 |
| [26] | Chun J., Kishore R.A., Kumar P., et al. (2018). Self-powered temperature-mapping sensors based on thermo-magneto-electric generator. ACS Appl. Mater. Interfaces 10:10796−10803. DOI:10.1021/acsami.7b17686 |
| [27] | Rodrigues C., Pires A., Gonçalves I., et al. (2022). Hybridizing triboelectric and thermomagnetic effects: A novel low-grade thermal energy harvesting technology. Adv. Funct. Mater. 32:2110288. DOI:10.1002/adfm.202110288 |
| [28] | Gong S., Wang X., Tang B., et al. (2024). Achieving self-reinforcing triboelectric-electromagnetic hybrid nanogenerator by magnetocaloric and magnetization effects of gadolinium. Adv. Mater. 36:2402824. DOI:10.1002/adma.202402824 |
| [29] | Lallart M., Yan L., Miki H., et al. (2021). Heusler alloy-based heat engine using pyroelectric conversion for small-scale thermal energy harvesting. Appl. Energy 288:116617. DOI:10.1016/j.apenergy.2021.116617 |
| [30] | Gueltig M., Ossmer H., Ohtsuka M., et al. (2014). High frequency thermal energy harvesting using magnetic shape memory films. Adv. Energy Mater. 4:1400751. DOI:10.1002/aenm.201400751 |
| [31] | Joseph J., Ohtsuka M., Miki H., et al. (2020). Upscaling of thermomagnetic generators based on Heusler alloy films. Joule 4:2718−2732. DOI:10.1016/j.joule.2020.10.019 |
| [32] | Joseph J., Ohtsuka M., Miki H., et al. (2022). Thermal processes of miniature thermomagnetic generators in resonant self-actuation mode. iScience 25:104569. DOI:10.1016/j.isci.2022.104569 |
| [33] | Liu X., Zhang H., Chen H. et al., (2023). Significant optimization of active thermomagnetic generator for low-grade waste heat recovery. Appl. Therm. Eng. 221:119827. DOI:10.1016/j.applthermaleng.2022.119827 |
| [34] | Liu X., Chen H., Huang J., et al. (2023). High-performance thermomagnetic generator controlled by a magnetocaloric switch. Nat. Commun. 14:4811. DOI:10.1038/s41467-023-40634-x |
| [35] | Ma Z., Chen H., Liu X., et al. (2021). Thermomagnetic generation performance of Gd and La(Fe, Si)13Hy/In material for low-grade waste heat recovery. Adv. Sustainable Syst. 5:2000234. DOI:10.1002/adsu.202000234 |
| [36] | Chen H., Liu X., Liu Y., et al. (2024). Excellent thermomagnetic power generation for harvesting waste heat via a second-order ferromagnetic transition. Mater. Horiz. 11:2603−2614. DOI:10.1039/d3mh02225k |
| [37] | Chen H., Zhang H., Liu M., et al. (2026). High-performance thermomagnetic generation in low-grade waste heat recovery. Chin. Phys. B 35:027201. DOI:10.1088/1674-1056/ae1205 |
| [38] | Waske A., Dzekan D., Sellschopp K., et al. (2018). Energy harvesting near room temperature using a thermomagnetic generator with a pretzel-like magnetic flux topology. Nat. Energy 4:68−74. DOI:10.1038/s41560-018-0306-x |
| [39] | Bahl C.R.H., Engelbrecht K., Gideon A., et al. (2024). Design, optimization and operation of a high power thermomagnetic harvester. Appl. Energy 376:124304. DOI:10.1016/j.apenergy.2024.124304 |
| [40] | Christiaanse T. and Brück E. (2014). Proof-of-concept static thermomagnetic generator experimental device. Metall. Mater. Trans. E 1:36−40. DOI:10.1007/s40553-014-0006-9 |
| [41] | Lallart M., Wang L., Sebald G., et al. (2014). Analysis of thermal energy harvesting using ferromagnetic materials. Phys. Lett. A 378:3151−3154. DOI:10.1016/j.physleta.2014.09.016 |
| [42] | Liu Z., Tegus O., Ou Z. et al., (2015). Thermomagnetic power generation of Mn1.2Fe0.8P1−xSix compounds in strongfield of permanent magnet. Acta Phys. Sin. 64:047103. DOI:10.7498/aps.64.047103 |
| [43] | Bi L., Tegus O., Yi R., et al. (2012). Thermomagnetic power generation performance of first-order phase transition material Mn1.2Fe0.8P0.4Si0.6. Acta Phys. Sin. 61:077103. DOI:10.7498/aps.61.077103 |
| [44] | Liu J., Long Y., Bai D., et al. (2019). Magnetic properties of FeNi alloys for high-temperature thermomagnetic power generation. AIP Adv. 9:045227. DOI:10.1063/1.5086411 |
| [45] | Dzekan D., Diestel A., Berger D., et al. (2021). Can gadolinium compete with La-Fe-Co-Si in a thermomagnetic generator. Sci. Technol. Adv. Mater. 22:643−657. DOI:10.1080/14686996.2021.1957657 |
| [46] | Chen H., Ma Z., Liu X., et al. (2022). Evaluation of thermomagnetic generation performance of classic magnetocaloric materials for harvesting low-grade waste heat. Appl. Energy 306:117999. DOI:10.1016/j.apenergy.2021.117999 |
| [47] | Jiang C., Zhu S., Yu G., et al. (2022). Numerical and experimental investigations on a regenerative static thermomagnetic generator for low-grade thermal energy recovery. Appl. Energy 311:118585. DOI:10.1016/j.apenergy.2022.118585 |
| [48] | Kishore R.A. and Priya S. (2018). A review on low-grade thermal energy harvesting: materials, methods and devices. Materials 11:1081433. DOI:10.3390/ma11081433 |
| [49] | Dzekan D., Waske A., Nielsch K., et al. (2021). Efficient and affordable thermomagnetic materials for harvesting low grade waste heat. APL Mater. 9:011105. DOI:10.1063/5.0033970 |
| [50] | Sarker M.R., Riaz A., Lipu M.S.H., et al. (2024). Micro energy harvesting for IoT platform: Review analysis toward future research opportunities. Heliyon 10:e27778. DOI:10.1016/j.heliyon.2024.e27778 |
| [51] | Haras M. and Skotnicki T. (2018). Thermoelectricity for IoT – A review. Nano Energy 54:461−476. DOI:10.1016/j.nanoen.2018.10.013 |
| [52] | He H., Wu Y., Niu C., et al. (2024). Toward tiny high-power-density thermoelectric harvesters. Energy Convers. Manage. 300:117954. DOI:10.1016/j.enconman.2023.117954 |
| Chen H., Liu M., Jin S., et al. (2026). A low-stray-field thermomagnetic generator enabling high power density for low-grade waste heat recovery. The Innovation Energy 3:100192. https://doi.org/10.59717/j.xinn-energy.2026.100192 |
To request copyright permission to republish or share portions of our works, please visit Copyright Clearance Center's (CCC) Marketplace website at marketplace.copyright.com.
Working principle and system design of the thermomagnetic generator (TMG)
Magnetic and thermal properties of the thermomagnetic materials
Device structure and performance characterization of the active TMG
Measured and simulated peak voltage of the TMG depending on the key operating parameters
Scalable TMG array and potential practical applications